ATmega128 Board - ATmega128-TB1.1, ATmega128 Board, ATmega128 Development Board, ATmega128-Board

AVR ATmega128 TinyBoard V1.1, Development Board

The ATm128-TB1.1 board was replaced by ATm128-TB1.2 !

full motherboard / prototype board for ATmega128
super thin only 34mm x 40mm x 8mm (mini module)
all pins are available on headers (2,54mm-/0,1" pitch), 2x15pins each
high computing power
easy to use: just connect to power supply (+5V) and program device
2 crystals: 16 MHz system clock, 32.768 kHz asynchron timer/counter0
separate grounds: analog and digital
large continues ground plane / reference plane for improved signal integrity and shielding
ISP programming pins on right header
board fits in 2.54mm pitch prototype PCB

fully assembled board includes:

ATmega128-16AI / ATmega128L-8AU (-40 bis +85°C), X1 crystal 16 MHz, X2 crystal 32.768 kHz (for asynchron timer)
header layout, schematics, programming tutorial

options:

ATmega128L option - low voltage version (2.7V-5.5V) with ATmega128L-8AI / ATmega128L-8AU and 8 MHz crystal
AT90CAN128 option - AT90CAN128-16AI / AT90CAN128-16AU with CAN Controller - V2.0A and V2.0B
(CAN 2.0A, CAN 2.0B)
ATmega128-16 with 14.7456 MHZ crystal for serial communication (USART1 and USART2) without baud rate error

board fits in 2,54mm pitch prototype PCB

128KB FLASH for ATmega128
256KB FLASH for ATmega2561
4 KB SRAM (internal RAM)
4 KB EEPROM
64-pin Version
53 I/O pins
hardware multiplier
programming lock for software security
SPI Interface for In-System Programming
real time counter with separate oscillator
8-channel, 10-bit ADC:
- 8 single-ended channels
- 7 differential channels
- 2 differential channels with programmable gain at 1x, 10x, or 200x
dual programmable serial USARTs (2x UART)
Master/Slave SPI serial interface
2x 8bit timer, 2x 16bit timer
16 MHz RISC