UDAD (USB Data Aquisition Device)

 

The USB-Data-Aquisition-Device (UDAD) is for general purpose high speed data aquisition.
    Diffent USB-Interconnect devices (USB chips) can be used.
It is released under MIT License.

                                                                       

 


UDAD Devices
UDAD-T1 UDAD based on Cypress FX2-56

UDAD-T1UDAD-T1



  • USB2 High Speed (480Mbit/s)
  • up to 16-bit data per clock cycle
  • debugging is possible by serial interface
  • Cypress CY7C68013A-56 - low power Version of CY7C68013-56, full USB2 specified
  • tiny board, board dimensions 35mm x 51mm (mini module)
  • all pins available on headers (2,54mm-/0,1" pitch)
  • Mini USB connector
  • 128kbit EEPROM onboard
  • onboard voltage regulator (bottom side)
  • GPIF Interface
  • reset push button
  • power led
  • memory extention socket (bottom side) 1.27mm pitch
  • device can be configured / programed / booted over USB and by the onboard eeprom for stand alone
  • schematics and PCB files under MIT license
UDAD-T2 UDAD based on Cypress FX2-128

USAD-T2UDAD-T2


  • USB2 High Speed (480Mbit/s)
  • up to 16-bit data per clock cycle
  • debugging is possible by serial interface
  • Cypress CY7C68013A-128PVXC - low power Version of CY7C68013-128, full USB2 specified
  • tiny board, board dimensions 62mm x 76mm (mini module)
  • all pins available on headers (2,54mm-/0,1" pitch)
  • Mini USB connector
  • 128kbit EEPROM onboard
  • onboard voltage regulator (bottom side)
  • GPIF Interface
  • reset push button
  • power led
  • memory extention socket (bottom side) 1.27mm pitch
  • device can be configured / programed / booted over USB and by the onboard eeprom for stand alone
  • schematics and PCB files under MIT license

 

 

[SIPHEC home]