[SIPHEC home]

Development Boards:

keywords: development board, prototype board, evaluation board, evaluation kit

Most of the development board are designed for Embedded Systems and
are suited for Rapid Prototyping!
These mini modules have a small form factor (small size).

USB to serial converter, USB to parallel converter:

FT232-Modules, FT245-Modules, FT232, FT232BM, FT232R, FT232RQ, FT245, FT245BM, FT245BL, FT245R, FT245RQ

USB to serial converter (USB2SERIAL):
FT232-Module with FT232, FT232BM, FT232BL, FT232R, FT232RQ

USB to parallel converter (USB2PARALLEL):
FT245-Module with FT245, FT245BM, FT245BL, FT245R, FT245RQ

RS232 to TTL / TTL to RS232 (RS232-to-TLL / TTL2RS232):
RS232-TTL module, TTL-RS232 module

Page Contents:

microcontroller, development board, prototype board, evaluation board, evaluation kit, header board, PCB, mezzanine card, mezzanine board, rapid prototyping, prototyping hardware mini modules, micro modules, microcontroller, FPGA (Field Programmable Gate Array), programmable logic, CPLD,

ATmega board, ATmega-board, AVR ATmega-board, ATmega development board, ATmega prototype board, ATmega evaluation board, ATmega evaluation kit, ATmega header board, ATmega PCB AVR ATmega Board, AVR prototype board, AVR header board, AVR ATmega USB Board, AVR USB Board, AVR MiniUSB Board, AVR FT232 USB Board, AVR CP2102 Board, AVR ISP-Programmer for Atmel Microcontroller AVR ISP, AVR JTAG, AVR ISP Programmer, AVR ISP Dongle, AVR USB ISP-Programmer for Atmel Microcontroller, AVR USB Programmer, AVR USB JTAG ICE for Atmel Microcontroller, AVR JTAG device, AVR JTAG ICE, ATmega128, ATmega128L, ATmega1280, ATmega256, ATmega2561, ATmega2560, AT90CAN128, ATmega128 Low Power, ATmega128 low voltage, ATmega128-board, ATmega128L board, ATmega1280 board, ATmega2560 board, ATmega2561 board, ATmega2560 board, AT90CAN128 board, ATmega128 PCB, ATmega128L PCB, ATmega1280 PCB, ATmega256 PCB, ATmega2561 PCB, ATmega2560 PCB, AT90CAN128 PCB, ATmega128 Low Power PCB, ATmega128 low voltage PCB, ATmega128 prototype board, ATmega128L prototype board, ATmega1280 prototype board, ATmega2560 prototype board, ATmega2561 prototype board, ATmega2560 prototype board, AT90CAN128 prototype board, ATmega128 evaluation board, ATmega128L evaluation board, ATmega1280 evaluation board, ATmega2560 evaluation board, ATmega2561 evaluation board, ATmega2560 evaluation board, AT90CAN128 evaluation board, ATmega128-FT232-Board, ATmega128 FT232 USB Board, ATmega FTDI-FT232 USB Board, ATmega FT232 Serial USB Board, ATmega1280-FT232-Board, ATmega1280 FT232 USB Board, ATmega FTDI-FT232 USB Board, ATmega FT232 Serial USB Board, ATmega1280-CP2102-Board, ATmega1280 CP2102 USB Board, ATmega CP2102 Serial USB Board, ATmega128-FT232-Board, ATmega128 FT232 USB Board, ATmega FTDI-FT232 USB Board, ATmega FT232 Serial USB Board, ATmega128-CP2102-Board, ATmega128 CP2102 USB Board, ATmega CP2102 Serial USB Board, ATmega2561-FT232-Board, ATmega2561 FT232 USB Board, ATmega FTDI-FT232 USB Board, ATmega FT232 Serial USB Board, ATmega2561-CP2102-Board, ATmega2561 CP2102 USB Board, ATmega CP2102 Serial USB Board, ATmega2560-FT232-Board, ATmega2560 FT232 USB Board, ATmega FTDI-FT232 USB Board, ATmega FT232 Serial USB Board, ATmega2560-CP2102-Board, ATmega2560 CP2102 USB Board, ATmega CP2102 Serial USB Board, ATmega128-16AI, ATmega128 16AI, ATmega128-16AU, ATmega128 16AU, ATmega1280-16AI, ATmega1280 16AI, ATmega1280-16AU, ATmega1280 16AU, ATmega2561-16AI, ATmega2561 16AI, ATmega2561-16AU, ATmega2561 16AU, ATmega2560-16AI, ATmega2560-16AI, ATmega2560-16AU, ATmega2560 16AU, AT90CAN128-16AI, AT90CAN128 16AI, AT90CAN128-16AU, AT90CAN128 16AU, CAN Controller - V2.0A and V2.0B Serial2USB, Serial-to-USB, serial-USB-bride, serial2USB converter, serial to USB converter FTDI FT232, up to 921.6kbps with VCP (Virtual COM Port) / 3Mbps D2XX, FTDI FT232BM, FTDI FT232BL, FTDI FT232R, FTDI FT232RQ, FTDI FT232 board, FTDI FT232R board, FT232 board, FT232R board, FTDI FT232R board, FTDI FT232 PCB, FTDI FT232R PCB, FT232 D2XX driver, FT232 VCP driver, FTDI FT232 prototpye board, FTDI FT232R prototpye board, FTDI FT232 evulation board, FTDI FT232R evulation board, FTDI FT232 header board, FTDI FT232R header board, FTDI FT232BL board, FTDI FT232BL prototpye board, FTDI FT232BL evulation board, FTDI FT232BL header board, FTDI FT232BL PCB, FTDI FT2232D board, FTDI FT2232D prototpye board, FTDI FT2232D evulation board, FTDI FT2232D header board, FTDI FT2232D PCB, FTDI FT2232C board, FTDI FT2232C prototpye board, FTDI FT2232C evulation board, FTDI FT2232C header board, FTDI FT2232C PCB, FTDI FT2232L board, FTDI FT2232L prototpye board, FTDI FT2232L evulation board, FTDI FT2232L header board, FTDI FT2232L PCB, FT2232, FT2232 JTAG, MPSSE JTAG DLL, MPSSE I2C DLL, MPSSE SPI DLL, FT2232 VCP driver, D2XX driver, Silicon Labs (SiLabs) CP2102, up to 128kbps, SI CP2102, CP2102-GM, USB-Parallel Converter, USB parallel microcontroller interface, FTDI FT245, FTDI FT232BM, FTDI FT245BL, FTDI FT245R, FTDI FT245RQ, TI MSP430, TI MSP430 board, TI-MSP430-board, TI MSP430-board, MSP430 header board, MSP430-header-board, TI MSP430 development board, MSP430 prototype board, MSP430 PCB, TI MSP430F, TI MSP430 Microcontroller, TI MSP430 JTAG ICE, Compact Flash Card Adapter, CF-Adapter, CFA, Compact Flash Card, DM9000 board, DM9000 board, DM9000 board, Davicom DM9000 ethernet controller board, DM9000 ethernet controller with general processor interface, DM9000A board, DM9000AE board, DM9000AEP board, Davicom DM9000A ethernet controller board, DM9000A ethernet controller with general processor interface, DM9000E board, DM9000EP board, DM9000E ethernet controller board, DM9000E ethernet controller with general processor interface, ADXL330 board, XYZ three axis accelerometer, 3-axis, +/-3g, ADXL330 accelerometer sensor, ADXL330KCPZ board, Analog Devices ADXL330 board, Analog Devices ADXL330KCPZ board, MMA7260Q board, ± 1.5g - 6g XYZ three axis low-g micromachined accelerometer, MMA7260Q accelerometer sensor 3-axis, ±1.5g/2g/4g/6g, MMA7260QT board, Freescale MMA7260Q board, MMA7260QT board, ± 1.5g - 6g XYZ three axis low-g micromachined accelerometer, MMA7260QT accelerometer sensor 3-axis, ±1.5g/2g/4g/6g, MMA7260QT board, Freescale MMA7260QT board, CY7C68013A Board, EZ-USB FX2LP Microcontroller with Cypress CY7C68013A-128PVXC, CY7C68013A USB2 High Speed Microcontroller (480Mbit/s), CY7C68013A Board with external 64KB memory for Keil debugging, FX2-Board, EZ-USB tutorial, Keil debug monitor, MON51, Keil µVision2, µVision, Keil uVision2, uVision CY7C68013 Board, CY7C68013-Board, CY7C68013 PCB, CY7C68013-PCB, FX2-Board, FX2LP-Board, FX2 Evaluation Board, Cypress CY7C68013A-56, Cypress CY7C68013A-100, Cypress CY7C68013A-128, Cypress CY7C68013A-56LFXC, Cypress CY7C68013A-56PVXC, Cypress CY7C68013A-128PVXC USB2.0 HighSpeed, EZ-USB, Cypress CY7C68013A, FX2 Board, USB2ATA, USB to IDE (USB2IDE, USB2ATA), FPGA, Field Programmable Gate Array, Xilinx FPGA, Xilinx CPLD Xilinx FPGA, XC3S200, XC3S400, XC3S1000, Xilinx FPGA PCB, XC3S200 PCB, XC3S400 PCB, XC3S1000 PCB, Xilinx FPGA development board, XC3S200 development board, XC3S400 development board, XC3S1000 development board, Xilinx FPGA, XC3S200-4PQG208C, XC3S200-4PQ208C, XC3S400PQ208, XC3S400-4PQG208C, XC3S1000PQ208, XC3S1000-4PQG208C, Xilinx FPGA, XC3S200-4FTG256C, XC3S400-4FTG256C, XC3S1000-4FTG256C RS232-USB-Converter, galvanic isolation, galvanical isolation, galvanic decoupling, galvanical decoupling RS232-to-TTL, RS232-TTL-Converter, RS232-to-USB galvanic isolation, USB-to-RS232 galvanic decoupling, USB2RS232, USB2RS232-OPTO, RS422-to-USB galvanic isolation, USB-to-RS422 galvanic decoupling, USB2RS422, USB2RS422-OPTO, RS485-to-USB galvanic isolation, USB-to-RS85 galvanic decoupling, USB2RS485, USB2RS422-OPTO,

 

USB-SERIAL Converter

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge

 
 

FTDI FT232 - USB-SERIAL Converter

    
 

FT232-uMod-RFT232 Module, FT232 Board, Development Board, FT232BM Board, FT232BL Board

FT232 Micro Module, Universal USB Controller with FT232BM or FT232BL

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • universal USB1.1 / USB2.0 (Full Speed) Controller for mircocontrollers
  • easy to use for microcontrollers
  • EEPROM onboard
  • MiniUSB connector
  • fits in 20 pin  DIP sockel
  • dimensions: 18.5mm x 41mm

HARDWARE FEATURES of FT232BM / FT232BL:

  • Single Chip USB Asynchronous Serial Data Transfer
  • Full Handshaking & Modem Interface Signals
  • UART I/F Supports 7 / 8 Bit Data, 1 / 2 Stop Bits and Odd/Even/Mark/Space/No Parity
  • Data rate 300 => 3M Baud (TTL)
  • Data rate 300 => 1M Baud (RS232)
  • Data rate 300 => 3M Baud (RS422/RS485)
  • 384 Byte Receive Buffer / 128 Byte Transmit Buffer for high data throughput
  • Adjustable RX buffer timeout
  • Fully Assisted Hardware or X-On / X-Off Handshaking
  • In-built support for event characters and line break condition
  • Auto Transmit Buffer control for RS485
  • Support for USB Suspend / Resume through SLEEP# and RI# pins
  • Support for high power USB Bus powered devices through PWREN# pin
  • Integrated level converter on UART and control signals for interfacing to 5V and 3.3V logic
  • Integrated 3.3V regulator for USB IO
  • Integrated Power-On-Reset circuit
  • Integrated 6MHz – 48Mhz clock multiplier PLL
  • USB Bulk or Isochronous data transfer modes
  • UHCI / OHCI / EHCI host controller

module comes with Mini-USB cable
       
 

FT232-uMod-S

FT232 - FT232R - FT232RQ Development Board - FT232 Micro Module, FT232 Module, FT232 Board, FT232 Development Board, FT232BM Board, FT232BL Board

FT232 Micro Module, Universal USB Controller with FT232R / FT232RQ

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • USB1.1 / USB2.0 (Full Speed) to serial bridge, USB to asynchronous serial data transfer interface
  • fully assisted hardware or X-On / X-Off software handshaking.
  • data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
  • 256 byte receive buffer and 128 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases.
  • In-built support for event characters and line break condition.
  • new USB FTDIChip-ID™ feature
  • integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings, and CBUS I/O configuration.
  • new configurable CBUS I/O pins
  • device supplied preprogrammed with unique USB serial number
  • MiniUSB connector
  • RX, TX LED
  • fits in 20 pin  DIP sockel
  • all pins available: RXD, TXD, RTS, CTS,  DTR, DSR, DCD, RI, CBUS0, CBUS1, CBUS2, CBUS3, CBUS4, RESET, OSCI, OSCO, 3.3V, 5V, GND
  • dimensions: 17mm x 25mm

module comes with Mini-USB cable

  
       
 

FT232-uMod-T

FT232 - FT232R - FT232RQ Development Board - FT232 Micro Module, FT232 Module, FT232 Board, FT232 Development Board, FT232BM Board, FT232BL Board

FT232 Micro Module, Universal USB Controller with FT232R / FT232RQ

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • USB1.1 / USB2.0 (Full Speed) to serial bridge, USB to asynchronous serial data transfer interface
  • fully assisted hardware or X-On / X-Off software handshaking.
  • data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
  • 256 byte receive buffer and 128 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases.
  • In-built support for event characters and line break condition.
  • new USB FTDIChip-ID™ feature
  • integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings, and CBUS I/O configuration.
  • new configurable CBUS I/O pins
  • device supplied preprogrammed with unique USB serial number
  • MiniUSB connector
  • RX, TX LED
  • pins available: RXD, TXD, RTS, CTS,  DTR, DSR, DCD, RI, CBUS0, 5V, GND
  • dimensions: 15mm x 17mm
module comes with Mini-USB cable		  
       
 

FT232-uMod-U

FT232 - FT232R - FT232RQ Development Board - FT232 Micro Module, FT232 Module, FT232 Board, FT232 Development Board, FT232BM Board, FT232BL Board

FT232 Micro Module, Universal USB Controller with FT232R / FT232RQ

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • USB1.1 / USB2.0 (Full Speed) to serial bridge, USB to asynchronous serial data transfer interface
  • fully assisted hardware or X-On / X-Off software handshaking.
  • data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
  • 256 byte receive buffer and 128 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases.
  • In-built support for event characters and line break condition.
  • new USB FTDIChip-ID™ feature
  • integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings, and CBUS I/O configuration.
  • new configurable CBUS I/O pins
  • device supplied preprogrammed with unique USB serial number
  • MiniUSB connector
  • pins available: RXD, TXD, 5V, GND
  • dimensions: 10mm x 17mm

module comes with Mini-USB cable

 
       
 

FT232-uMod-V

FT232 - FT232R - FT232RQ Development Board - FT232 Micro Module, FT232 Module, FT232 Board, FT232 Development Board, FT232BM Board, FT232BL Board

FT232 Micro Module, Universal USB Controller with FT232R / FT232RQ

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • USB1.1 / USB2.0 (Full Speed) to serial bridge, USB to asynchronous serial data transfer interface
  • fully assisted hardware or X-On / X-Off software handshaking.
  • data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
  • 256 byte receive buffer and 128 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases.
  • In-built support for event characters and line break condition.
  • new USB FTDIChip-ID™ feature
  • integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings, and CBUS I/O configuration.
  • new configurable CBUS I/O pins
  • device supplied preprogrammed with unique USB serial number
  • MiniUSB connector
  • pins available: RXD, TXD, RTS, CTS, 5V, GND
  • dimensions: 12mm x 17mm

module comes with USB cable

 
       
 

FT232-uMod-W

FT232 - FT232R - FT232RQ Development Board - FT232 Micro Module, FT232 Module, FT232 Board, FT232 Development Board, FT232BM Board, FT232BL Board

FT232 Micro Module, Universal USB Controller with FT232R / FT232RQ

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • USB1.1 / USB2.0 (Full Speed) to serial bridge, USB to asynchronous serial data transfer interface
  • fully assisted hardware or X-On / X-Off software handshaking.
  • data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
  • 256 byte receive buffer and 128 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases.
  • In-built support for event characters and line break condition.
  • new USB FTDIChip-ID™ feature
  • integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings, and CBUS I/O configuration.
  • new configurable CBUS I/O pins
  • device supplied preprogrammed with unique USB serial number
  • MiniUSB connector
  • pins available: RXD, TXD, RTS, CTS, DTR, DSR, 5V, GND
  • adjustable IO voltages: 5V, 3.3V, user defined
  • dimensions: 10mm x 19mm

module comes with Mini-USB cable

 
       
 

Silicon Labs CP2102 - USB-SERIAL Converter

    
 

CP2102-uMod-C

CP2102 - CP2102-GM - CP2102 Module, CP2102 Board, CP2102 Development Board - CP2102 Micro Module

CP2102 Micro Module, Universal USB Controller with CP2102-GM

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • universal USB1.1 / USB2.0 (Full Speed) Controller for mircocontrollers
  • easy to use for microcontrollers
  • internal EEPROM
    Integrated 1024-Byte EEPROM for vendor ID, product
    ID, serial number, power descriptor, release number,
    and product description strings
  • MiniUSB connector
  • all pins available:  RXD, TXD, RTS, CTS,  DTR, DSR, DCD, RI, RESET, SUSPEND, /SUSPEND, 3.3V, 5V, GND
  • dimensions: 15mm x 22mm

module comes with USB cable

  
       
 

CP2102-uMod-T

CP2102 - CP2102-GM - CP2102 Module, CP2102 Board, CP2102 Development Board - CP2102 Micro Module

CP2102 Micro Module, Universal USB Controller with CP2102-GM

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • universal USB1.1 / USB2.0 (Full Speed) Controller for mircocontrollers
  • easy to use for microcontrollers
  • internal EEPROM
    Integrated 1024-Byte EEPROM for vendor ID, product
    ID, serial number, power descriptor, release number,
    and product description strings
  • MiniUSB connector
  • pins available: RXD, TXD, RTS, CTS,  DTR, DSR, DCD, RI, RESET, SUSPEND, /SUSPEND, 5V, GND
  • dimensions: 15mm x 17mm

module comes with Mini-USB cable

  
       
 

CP2102-uMod-U

CP2102 - CP2102-GM - CP2102 Module, CP2102 Board, CP2102 Development Board - CP2102 Micro Module

CP2102 Micro Module, Universal USB Controller with CP2102-GM

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • universal USB1.1 / USB2.0 (Full Speed) Controller for mircocontrollers
  • easy to use for microcontrollers
  • internal EEPROM
    Integrated 1024-Byte EEPROM for vendor ID, product
    ID, serial number, power descriptor, release number,
    and product description strings
  • MiniUSB connector
  • pins available: RXD, TXD, 5V, GND
  • dimensions: 10mm x 17mm

module comes with Mini-USB cable

  
       
 

CP2102-uMod-V

CP2102 - CP2102-GM - CP2102 Module, CP2102 Board, CP2102 Development Board - CP2102 Micro Module

CP2102 Micro Module, Universal USB Controller with CP2102-GM

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • universal USB1.1 / USB2.0 (Full Speed) Controller for mircocontrollers
  • easy to use for microcontrollers
  • internal EEPROM
    Integrated 1024-Byte EEPROM for vendor ID, product
    ID, serial number, power descriptor, release number,
    and product description strings
  • MiniUSB connector
  • pins available: RXD, TXD, RTS, CTS, 5V, GND
  • dimensions: 12mm x 17mm

module comes with USB cable

 
       
 

CP2102-uMod-W

CP2102 - CP2102-GM - CP2102 Module, CP2102 Board, CP2102 Development Board - CP2102 Micro Module

CP2102 Micro Module, Universal USB Controller with CP2102-GM

USB2SERIAL / USB2COM / USB2UART / USB UART Bridge
  • universal USB1.1 / USB2.0 (Full Speed) Controller for mircocontrollers
  • easy to use for microcontrollers
  • internal EEPROM
    Integrated 1024-Byte EEPROM for vendor ID, product
    ID, serial number, power descriptor, release number,
    and product description strings
  • MiniUSB connector
  • pins available: RXD, TXD, RTS, CTS, DTR, DSR, 5V, GND
  • adjustable IO voltages: 5V, 3.3V, user defined
  • dimensions: 10mm x 19mm

module comes with Mini-USB cable

  
       

USB-PARALLEL Converter

USB2PARALLEL / USB to Parallel for Microcontrollers

 
       
 

FT245-uMod-RFT245 Module, FT245 Board, FT245 Development Board, FT245BM Board, FT245BL Board

FT245 Micro Module, Universal USB Controller with FT245BM or FT245BL

USB2PARALLEL

  • universal USB1.1 / USB2.0 (Full Speed) Controller for mircocontrollers
  • easy to use parallel interface (8bit interface), optimized for microcontrollers
  • EEPROM onboard
  • MiniUSB connector
  • fits in 20 pin  DIP sockel
  • dimensions: 18.5mm x 41mm

HARDWARE FEATURES of FT245BM / FT245BL:

  • single Chip USB to Parallel FIFO bi-directional Data Transfer
  • transfer Data rate to 1MByte / sec - D2XX Drivers
  • simple to interface to MCU / PLD/ FPGA logic with a 4 wire handshake interface
  • entire USB protocol handled on-chip, no USB-specific firmware programming required
  • FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
  • 384 Byte FIFO Tx buffer / 128 Byte FIFO Rx Buffer for high data throughput.
  • integrated 6MHz – 48Mhz clock multiplier PLL
  • USB Bulk or Isochronous data transfer modes
  • USB 1.1 and USB 2.0 compatible
  • USB VID, PID , Serial Number and Product Description strings in external EEPROM
  • EEPROM programmable on-board via USB

module comes with Mini-USB cable

Development Tools: 

Drivers supplied by FTDI for Windows 98 / XP / ME / 2000 and Linux 

  • VCP (Virtual COM port) driver:
    adds a virtual COM port to the operation system when FT245 TinyBoard is plugged to USB 
  • D2XX driver:
      allows high speed data transfer up to 1MByte / sec via DLL user interface

For sample programs using D2XX DLL visit FTDI homepage.

Application:
       
 

FT245-uMod-S
 FT245 Module, FT245 Board, FT245 Development Board, FT245R Board, FT245RQ Board

FT245 Micro Module, Universal USB Controller with FT245R / FT245RQ

USB2PARALLEL

  • universal USB1.1 / USB2.0 (Full Speed) Controller for mircocontrollers
  • easy to use parallel interface (8bit interface), optimized for microcontrollers
  • simple interface to MCU / PLD / FPGA logic with simple 4-wire handshake interface
  • data transfer rate to 1 Megabyte / second - D2XX Direct Drivers
  • data transfer rate to 300 kilobyte / second - VCP Drivers
  • 256 byte receive buffer and 128 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput
  • FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
  • new USB FTDIChip-ID™ feature
  • integrated 1024 Bit internal EEPROM for storing USB VID, PID, serial number and product description strings
  • device supplied preprogrammed with unique USB serial number
  • MiniUSB connector
  • all pins available: D0, D1, D2, D3, D4, D5, D6, D7, RXF, TXE, RD, WR, PWREN, RESET, OSCI, OSCO, 3.3V, 5V, GND
  • fits in 20 pin  DIP sockel
  • dimensions: 17mm x 25mm

module comes with Mini-USB cable

  
       
       

RS232-TTL Converter

RS232 to TTL Converter

  
       
 

RS232-TTL-S

RS232-TTL Converter, RS232 Level to TTL converter, TTL2RS232 converter, TTL to RS232 converter

RS232-TTL-Converter

RS232-TTL-Converter with SUBD connector
  • TTL side: RXD, TXD, GND
  • Power is supplied by RS232 side through (self powered)
  • RTS = -12V, DTR = +12V or
  • RTS = +12V, DTR = -12V and also by
  • TXD-data
       

RS232-TTL-T

RS232-TTL-Converter
  RS232-TTL Converter, RS232 Level to TTL converter, TTL2RS232 converter, TTL to RS232 converter

RS232-TTL-Converter

RS232-TTL-Converter with SUBD connector
  • TTL side: RXD, TXD, RTS; CTS; GND
  • external 3.3-5V power supply necessary
 

[SIPHEC home]